Table of Contents
Advertisement
Stratasys J3 Series User Guide
mercury-vapor lights. Exposure to UV radiation causes an increase in viscosity
and, eventually, solidification.
Safety Considerations
Before being cured, resins are hazardous materials. To prevent possible
health hazards, follow these precautions regarding printing materials:
• Do not expose to flames, heat or sparks.
• Prevent contact with skin and eyes.
• Ventilate areas where they are handled.
• Keep them separate from food and drink.
Cured plastic parts, however, are safe. They can be handled and stored
without precautions.
You can find more safety information about resins in:
l
l
Disposal
Dispose of cartridges of model and support material in accordance with all
applicable laws and regulations.
Work Environment
Extreme heat and humidity conditions can adversely affect the operation of
your J3 Series 3D printer. Use ventilation or air-conditioning systems, if
necessary, to keep the work area within the following ranges:
• 18°–25° C (64°–77° F)
• 30%–70% relative humidity
DOC-19001 Rev. G
"Safety Guidelines" on page 2-4
"First Aid for Working with Printing Materials" on page 2-7
3 Introducing the 3D Printer
3-6
Advertisement
Table of Contents
