Table of Contents
Advertisement
Stratasys J3 Series User Guide
6. In the wizard screen, tap No Change for that channel.
7. To replace the material in the channel, select a new material.
DOC-19001 Rev. G
The material selection screen appears for the selected channel.
Figure 4-32 Material selection screen (sample)
The material cartridge currently loaded in the channel is indicated at the
bottom of the screen.
The message box
❒ Mismatch indicates that the material selected is not loaded in the
channel.
❒ Duplicate material indicates that the new material is already loaded in
another channel.
4 Operating and Maintaining the Printer
displays the results of your selection.
4-22
Advertisement
Table of Contents
