Table of Contents
Advertisement
Stratasys J3 Series User Guide
2. Make sure that the build tray is empty, close the printer door, and tap OK.
The printer remains in this state, by default, for up to 48 hours. The length of
time can be changed in Tools > Settings > Parameters.
3. From GrabCAD Print, send a job to the printer.
➢ If the printer is not in Ready state, the job is not printed immediately.
DOC-19001 Rev. G
Figure 4-13 Confirmation screen
When the printer state changes to Ready, the printer is ready to begin
printing as soon as jobs are received.
Figure 4-14 Ready state
The printer begins printing the job immediately.
Instead, it appears in Queue screen in the printer application. To start
printing the job, access the Queue screen, tap the desired job, and tap the
button.
4 Operating and Maintaining the Printer
4-10
Advertisement
Table of Contents
