Revision History - Stratasys J3 Series User Manual

Stratasys J3 Series User Guide

Revision History

Translations of this guide are updated periodically. If you are consuming a translated
version, please check the English version for the latest revision and list of updates.
The following table lists the main changes in each revision of this document.
Revision Release Date
Rev. A September 2021
Rev. B February 2022
Rev. C May 2022
Rev. D July 2022
Rev. E July 2022
Rev. F December 2022
Rev. G January 2023
DOC-19001 Rev. G
Description
First publication
Removing the Support Material, information
was added regarding SUP710 and WSS150.
Shutting Down the Printer, updated the number
of cleaning fluid cartridges required for more
than 30 days of shutdown.
• Customer Replacement Units was updated
to include a corrected part number for waste
cartridges.
• Using This Guide was updated to provide
information about how to get the latest
revision of the document and how to send
feedback.
• For More Information was removed.
• Additional Resources was renamed to
Stratasys Online Resources and updated to
include information about the Online
Stratasys Academy including the Stratasys
Academy YouTube Channel
Copyright was updated to include an FCC
Compliance section with Customer Support
contact information.
• Removing the Support Material was
updated to include a new WSS150 method.
• Patents was updated to include the UKCA
mark.
Minor corrections
1 About This Guide
1-4