Stratasys J3 Series User Manual page 72

Stratasys J3 Series User Guide
7. Pull the purge unit down to open it.
8. Lift and remove the waste collector.
9. Close the printer door, select the confirmation check boxes in the wizard
DOC-19001 Rev. G
Figure 4-59 Opening the purge unit
Figure 4-60 Removing the purge-unit waste collector
screen, and tap Next.
Figure 4-61 Removing the purge-unit waste collector
The printer moves the wiper into position for easy removal.
4 Operating and Maintaining the Printer
4-44