Table of Contents
Advertisement
Objet500 User Guide
12. C onfirm this in the wizard screen, and click Next.
13. I n the final sceen, click Done to close the wizard.
Pattern Test
The pattern test is the basic verification of the printer's ability to produce quality
models, since it demonstrates the condition of the nozzles in the print heads.
Make sure, therefore, that you perform this test weekly, and whenever you
suspect a printing problem.
To perform the pattern test:
1. Make sure that the build tray is empty.
2. Prepare a sheet of pink paper, A-4 or Letter size.
3. In the printer, tape the pink paper to the surface left of the build tray.
4. Press F3, or open the Options menu and select Pattern Test.
5. Click Yes in the Confirm dialog box to begin.
DOC-07027 Rev. I
Figure 6-34 Tray and cover confirmation
Figure 6-35 Selecting Pattern Test
6 Operating and Maintaining the Printer
6-35
Advertisement
Table of Contents
