Table of Contents
Advertisement
Stratasys J3 Series User Guide
23. Detach the driver card from the installation tool, and install it. Secure it with
24. Move the supporting bracket back into place, under the driver cards, and
25. Lower the electronics assembly and tighten the thumb screws to secure it.
26. Attach the printer cover.
DOC-19001 Rev. G
the latches.
Figure 4-93 Installing the print-head driver card
make sure that all of the cards are secure in the circuit board.
Figure 4-94 Bracket supporting the driver-cards
4 Operating and Maintaining the Printer
4-64
Advertisement
Table of Contents
