Table of Contents
Advertisement
Stratasys J3 Series User Guide
7. Confirm the items in the wizard screen, and tap Next.
Scanning the Transparencies
After printing the test pattern on a transparency, you scan it. In addition, you
scan the reference (grid) transparency.
The illustrations in this section show the Canon CanoScan LiDE 400
interface.
If you need to install the software for this scanner, download it from:
https://www.canon.co.uk/support/consumer_products/products/scanners/lide_
series/canoscan-lide-
400.html?type=drivers&language=&os=windows%2010%20(64-bit)
Use the scanner supplied with your printer or the one currently
recommended by Stratasys.
For convenience, the scanner should be connected to the computer running
GrabCAD Print.
To scan the transparencies:
1. On the GrabCAD client connected to the scanner, open the scanning
DOC-19001 Rev. G
Figure 4-103 Build tray cap removed
A test pattern is printed on the transparency. This completes the first part of
the calibration process.
application.
Figure 4-104 Scanner icon
4 Operating and Maintaining the Printer
4-70
Advertisement
Table of Contents
