Stratasys J3 Series User Manual page 46

Stratasys J3 Series User Guide
If you cannot continue printing:
1. Cancel the job.
2. Remove the partially printed 3D print from the build tray.
3. Resend the job to the printer.
You can stop printing from either the printer interface or from GrabCAD
Print.
• After clicking the Stop button in GrabCAD Print, you can resume printing
from GrabCAD Print or from the printer interface.
• After stopping printing from the printer interface, you can resume printing
only from the printer interface.
DOC-19001 Rev. G
In GrabCAD Print, in the Schedule screen (see above):
❒ Right-click on the job to display the pop-up menu, and select Cancel
job.
OR—
❒ Left-click on the job to display the Job Status details, and click the
Cancel icon .
OR—
❒ On the printer interface, display the screen containing full job details
(see above), and tap Cancel.
❒ In GrabCAD Print: Click
OR—
❒ On the printer interface: Display the screen containing full job details
(see above), and tap Reprint.
4 Operating and Maintaining the Printer
.
4-18