Table of Contents
Advertisement
Stratasys J3 Series User Guide
13. Save the scanned files in a convenient folder on your computer.
14. Once you have finished the scans, wet a cleaning cloth with isopropanol
Analyzing the Transparencies
After scanning the test pattern and the reference grid, they are analyzed by
GrabCAD Print, and calibration parameters are calculated.
To analyze the transparencies:
1. Open GrabCAD Print, and click on the name of the current printer to open
DOC-19001 Rev. G
Next, you load these files to GrabCAD Print for analysis.
and clean the scanner platen.
Important: Always wear gloves when handling these items.
the Select a Printer list.
Figure 4-113 Opening the printer list
4 Operating and Maintaining the Printer
4-75
Advertisement
Table of Contents
