Table of Contents
Advertisement
Stratasys J3 Series User Guide
Starting the Printer
Caution
l
l
1. Make sure that the main power switch, at the back of the printer, is in the
2. Press the power button.
3. When the following screen appears, make sure that the printer door is
DOC-19001 Rev. G
Do not attempt to operate the printer before being trained by an authorized
Stratasys representative.
Observe all safety warnings and follow the safety guidelines described in
Chapter 2.
ON position.
Figure 4-1 Main power switch and cable
The power button on the front of the printer blinks.
Figure 4-2 Power button
Powering up the printer can take several minutes.
closed, and tap OK.
Figure 4-3 Hardware Initialization screen
4 Operating and Maintaining the Printer
4-3
Advertisement
Table of Contents
