Safety Features - Stratasys J5 Series User Manual

Stratasys J5 Series User Guide

Safety Features

Interlock Switch
Safety Lock
UV Screening
Grounded Chassis
DOC-09270 Rev. B
Stratasys 3D printers are designed to comply with CE and FCC
standards. They are equipped with the following safety features:
The power supplied to the UV light is turned off when the door is
opened.
Warning
Do not defeat (override) the interlock switch. Doing so could
result in serious personal injury. If the interlock switch does not
function correctly, do not use the printer, and contact your service
provider.
The door is locked while the printer is working. If you do manage to
open it, the UV light and the motors turn off.
Warning
Do not defeat (override) the safety lock. Doing so could result
in serious personal injury. If the safety lock does not function
correctly, do not use the printer, and contact your service provider.
The transparent sections of the door and sides block harmful UV
radiation, allowing the operator to view models as they are being
made.
Figure 2-1 Front view of the printer
The chassis of the printer is grounded, to prevent electrical shock.
Note: The power outlet must be grounded in accordance with the
local electric code to provide this protection.
2 Safety
2-2