Safety Features - Stratasys Objet30 User Manual

Objet30 User Guide

Safety Features

Interlock Switch
Safety Lock
UV Screening
Circuit Breaker
Grounded Chassis
DOC-34025 Rev. I
Stratasys 3D printers are designed to comply with CE and FCC
standards. They are equipped with the following safety features:
The power supplied to the UV lamp and the motion motors is
turned off when the cover is opened.
Warning
Do not defeat (override) the interlock switch. Doing so could
result in serious personal injury. If the interlock switch does not
function correctly, do not use the printer, and contact your
service provider.
The cover is locked while the printer is working. The lock is
released when the printer reverts to pause or stop mode.
Warning
Do not defeat (override) the safety lock. Doing so could
result in serious personal injury. If the safety lock does not
function correctly, do not use the printer, and contact your
service provider.
The transparent section of the cover blocks harmful UV
radiation, allowing the operator to view models as they are being
made.
The power to the printer is turned off in case of electrical
overcurrent.
Note: The circuit breaker is only accessible to service
personnel.
The chassis of the printer is grounded, to prevent electrical
shock.
Note: The power outlet must be grounded in accordance with
the local electric code to provide this protection.
2 Safety
2-2