NEUTRAL SWITCH
INSPECTION
Disconnect the neutral switch connector from the
switch.
Shift the transmission into neutral and check for
continuity between the neutral switch terminal and
ground.
There should be continuity with the transmission is
in neutral, and no continuity when the transmission
is into gear.
REMOVAL/INSTALLATION
Disconnect the neutral switch connector from the
switch.
Remove the neutral switch and sealing washer.
Install the neutral switch with a new sealing washer.
Tighten the neutral switch to the specified torque.
TORQUE: 12 N•m (1.2 kgf-m, 9 lbf•ftl
Connect the neutral switch connector to the switch.
SIDESTAND SWITCH
INSPECTION
Remove the left side cover (page 2-4).
Disconnect the sidestand switch 2P {Green) connec
tor.
LIGHTS/METER/SWITCHES
'
'
���
CONNECTOR
�
._,_
SEALING WASHER'
�
-
,/
Ci
.
,
-
NEUTRAL SWITCH
--
-
,,
•.··
�
l t ,
20-23