Honda CB 600F Hornet 2007 Shop Manual page 370

RONT WHEEL/SUSPENSION/STEERING
Wheel bearing
Turn the inner race of each bearing with your finger.
The bearings should turn smoothly and quietly.
Also check that the bearing outer race fits tightly in
the hub.
Remove and discard the bearings if they do not turn
Replace the
smoothly, quietly, or if they fit loosely in the hub.
bearings in pa,rs.
Replace new bearings, if necessary (page 13-17).
Wheel rim runout
Check the rim runoul by placing the wheel in a turn­
ing stand.
Spin the wheel by hand, and read the runout using a
dial indicator.
Actual runout is 1/2 the total indicator reading.
SERVICE LIMITS:
Radial: 2.0 mm (0.08 in)
Axial: 2.0 mm (0.08 in)
Wheel balance
NOTE:
• Mount the tire with the arrow mark facing in the
direction of rotation.
• The wheel balance must be checked when the
tire is remounted.
• For optimum balance, the tire balance mark (light
mass point: a paint dot on the side wall) must be
located next to the valve stem. Remount the tire
if necessary.
3-16
r-
WHEEL BEARING
BALANCE MARK