LIGHTS/METER/SWITCHES
SHORT CIRCUIT IN THE FUEL LEVEL SYSTEM
If the fuel level indicator indicates the right illustra
tion (full fuel level) in spite of an empty fuel level,
check the fuel level system for short circuit.
Lift and support the fuel tank (page 3-5).
Disconnect the fuel level sensor 2P (Natural) con
nector.
Turn the ignition switch to "ON".
• If the fuel level indicator indicates as open circuit
indication, inspect the fuel level sensor.
•
If the indicator indicates as "FULL",
lowing.
-
Short circuit in the Gray/black wire between
the combination meter and the fuel level sen
sor
-
Faulty combination meter circuit board (page
20-10)
FUEL LEVEL SENSOR
REMOVAL/INSTALLATION
Remove the fuel tank (page 5-58).
Remove the nuts, fuel reserve sensor and O-ring.
Be careful not to
damage or bend
the reserve sensor
arm.
Check the 0-ring is in good condition and replace if
necessary.
Install the fuel reserve sensor into the fuel tank.
Be careful not to
damage or bend
Installation is in the reverse order of removal.
the reserve sensor
arm.
20-18
FUEL LEVEL INDICATOR (FULL POSITION)
check the
fol
�
El,.
------
,
�
,
.
J