Honda CB 600F Hornet 2007 Shop Manual page 492

Release the sensor wire clips.
Remove the wheel speed sensor mounting bolts
and guide.
Remove the wheel speed sensor from the caliper
bracket.
Clean around the mounting area of the caliper
bracket thoroughly, and be sure that no foreign
material is allowed to enter the mounting hole.
Route the sensor Install a new speed sensor in the reverse order of
w,re properly (page removal.
1-231•
After installation, check the air gap {page 16-24).
REAR WHEEL SPEED SENSOR
Remove the right side cover (page 2-4).
Disconnect the rear wheel speed sensor 2P (Green)
connector.
Release the sensor wire clip from the PCV stay.
Release the sensor wire from the clamps.
ANTI-LOCK BRAKE SYSTEM (ABS; CB600FA)
•
l
I
16-25