LIGHTS/METER/SWITCHES
Do not rum the bulb
Pull out the license light bulb and replace it with a
while removing
ir. new one.
Install the license light case in the reverse order of
removal.
Tighten the screws to the specified torque.
TORQUE: 1.7 N•m (0.2 kgf•m. 1.3 lbf•ft)
COMBINATION METER
REMOVAL/INSTALLATION
Remove the following:
-
headlight unit (page 20-6)
- meter cover (page 2-5)
Remove the dust cover and disconnect the combi
nation 20P connector.
Remove the screws and combination meter.
Install the combination meter in the reverse order of
the removal.
DISASSEMBLY
Remove the upper meter cover screws.
Remove the socket bolts and upper meter cover.
20-10
OUST COVER/2
CONNE
UPPER METER COVER
OMBINATION
ETER
SCREWS
SOCKET BOLTS