Honda CB 600F Hornet 2007 Shop Manual page 382

RONT WHEEL/SUSPENSION/STEERING
Hold the axle holder in a vise with soft jaws or a
shop towel.
Hold the fork damper with fork damper holder
attachment then tighten the fork socket bolt to the
specified torque.
TOOL:
Fork damper holder attachment
TORQUE: 20 N-m (2.0 kgf•m, 15 lbf•ft)
Pour the specified amount of recommended fork
fluid into the fork slider.
RECOMMENDED FORK FLUID:
Honda Ultra Cushion Oil 10W or equivalent
FORK FLUID CAPACITY:
494±2.5 cm•
(16.7 ± 0.08 US oz, 17.4
Bleed the air from the fork leg as follows.
1. Extend the fork, cover the top of the fork slider
with your hand and compress the fork leg slowly.
2. Remove your hand and extend the fork slowly.
Repeat above procedure 2 or 3 times.
3. Pump the fork damper rod slowly 8 -
Slowly push the slider, gently seat the dust seal
Be svre that the oil
rile onto axle holder and leave
revel ,s same in
1h9 borh forks.
After the oil level stabilizes, measure the oil level
from top of the fork tube.
FORK OIL LEVEL: 70 mm (2.8 in)
13-28
07 YMB-MCF0101
± 0.09 Imp oz)
10 times.
it for 5 minutes.
["'" :- --\ - ----:=:=:=::===::;�<
----.-
l
/i
FORK TUBE TOP
�
. .
l
70 mm (2.8 in)