Honda CB 600F Hornet 2007 Shop Manual page 272

Install the valve springs with the tightly wound coils
The exhaust valve
a facing the combustion chamber.
springs has green
pain,
marks and the
Install the valve spring retainer.
intake vtilve springs
has gray pa,m
marks
Install the valve cotters using the special tool as
Grease the cotters
ease shown.
to installation.
NOTE:
To prevent loss of tension, do not compress the
valve spring more than necessary.
TOOLS:
Valve spring compressor
Valve spring compressor
attachment
Tap the valve stems gently with two plastic ham­
Support the
mers as shown to seat the cotters firmly.
cylinder head abave
the work bench
Install and tighten the spark plugs.
surface to prevent
TORQUE: 16 N•m (1.6 kgf-m, 12 lbf-ft)
possible valve
damage.
Apply a locking agent to the bleeding joint threads.
Install the bleeding joint with a new sealing washer
to the cylinder head.
Tighten the bleeding joint to the specified torque.
TORQUE: 12 N-m (1.2 kgf-m, 9 lbf·ft)
EXHAUSTVALVE
SPRING
VALVE SPRING COMPRESSOR
07757--0010000
07959-KM30101
CYLINDER HEAD/VALVES
INTAKE VALVE
SPRING
J
COMB USTION CHAMBER SIDE
8-23