CRANKCASE REAR COVER
INSTALLATION
Set the sidestand switch wire clip to the hole of rear
cover B.
Set the drive chain guide plate onto the rear cover
B.
Install the drive chain guide plate/rear cover B and
tighten the bohs securely.
Install the gearshift arm, aligning its slit with the
punch mark on the gearshift spindle.
Install and tighten the pinch bolt to the specified
torque.
TORQUE: 20 N·m (2.0 kgf·m. 15 lbf-ft)
ENGINE REMOVAL/INSTALLATION
7-15