BLEED VALVE
5.4 N·m (0.6 kgf·m,
4.0 lbf . ft)
-
ASSEMBLY
PAD SPRING
CALIPER
®"
Coat a new piston seal with clean brake fluid and
install it in the seal groove in the caliper.
Coat a new dust seal with silicone grease and install
it in the seal groove in the caliper.
Coat the caliper piston with clean brake fluid and
install it into the caliper cylinder with the opening
toward the pads.
Check that the pad retainer is in place on the caliper
bracket .
Install the boot into the caliper bracket.
�
a PISTON SEAL
PAD SPRING
HYDRAULIC BRAKE
PAD RETAINER
CALIPER BRACKET
�·
sm
PISTON SEAL
� I
��oul.'I
RETAINER
PISTON
BOOT
15-47