Honda CB 600F Hornet 2007 Shop Manual page 315

Install the flywheel to the crankshaft.
Apply engine oil to the flywheel bolt threads and
seating surface.
Install the washer and flywheel bolt.
Hold the flywheel using the special tool, then .-------­
tighten the bolt to the specified torque.
TOOL:
Flywheel holder
TORQUE: 113 N•m (11.5 kgf•m, 83 lbf•ft)
AL TERNA TOR COVER INSTALLATION
Apply sealant to the mating surfaces of tho alterna-
tor cover and crankcase.
07725- 0 040001 or
equivalent commer­
cially available
Cover side:
Crankcase side:
10-15mm
(0.4
10-15 mm
(0.4- 0.6 in)
ALTERNATOR
- 0.6 in)
10-7