Honda CB 600F Hornet 2007 Shop Manual page 260

Using a micrometer, measure each cam lobe height.
SERVICE LIMITS:
IN: 36.22 mm (1.426 in)
EX: 35.40 mm (1.394 in)
CAMSHAFT HOLDERS
Inspect the bearing surface of the each camshaft
holder for scoring, scratches, or evidence of insuffi­
cient lubrication.
Inspect the oil orifices of the holders for clogging.
CAM CHAIN GUIDE B
Inspect the cam chain slipper surface of the cam
chain guide B for wear or damage.
CAMSHAFT OIL CLEARANCE
Wipe any oil from the journals of the camshaft, cyl-
Do not rorare the
inder head and camshaft holders.
camshaft when
Lay a strip of plastigauge lengthwise on top of each
using plasr,gauge
camshaft journal.
CYLINDER HEAD/VALVES
CAMSHAFT HOLDER A
CAMSHAFT HOLDER B
CAMSHAFT HOLDER C
CAM CHAIN GUIDE B
P""'�.,......,...,-.--,,.....,,,..,...,. __
•
8-11