Honda CB 600F Hornet 2007 Shop Manual page 77

MAINTENANCE
Record the Check the valve clearance for the No.2 and No.4 cyl­
inder intake valves using feeler gauge.
clearance for each
valve for reference
VALVE CLEARANCE:
in shim selection if
ad1usrmenr is IN: 0.20
requ,red.
Turn the crankshaft clockwise 1/2 turn (180
the index line on the CKP sensor rotor so that it is
facing up as shown.
Check the valve clearance for the No.1 and No.3 cyl•
Record the
c/r,arsncr, for r,ach inder exhaust valves using a feeler gauge.
valve for reference
VALV E CLEA RAN C E :
m sh,m selec t,on ,r
EX: 0. 2 8
ad 1 us1ment ,s
requ,red.
ADJUSTMENT
,s nor Remove the camshafts (page 8-8).
It necessary
ro remove rhe cam
Remove the valve lifters and shims.
sproclcer from rhe
• Shim may stick to the inside of the valve lifter.
camshaft e1<cept
Do not allow the shims to fall into the crankcase.
when replacing the
• Mark all valve lifters and shims to ensure correct
camshaft and/ o r
reassembly in their original locations.
cam sprocker
• The valve lifter can be easily removed with a
valve lapping tool or magnet.
• The shims can be easily removed with a twee­
zers or magnet.
3-12
± 0.03 mm (0.008 ± 0.001 in)
± 0 . 0 3 mm (0.011
± 0.001 in)
° ), align
No.2 INTAKE VALVES
No.1 EXHAUST VALVES
j