Honda CB 600F Hornet 2007 Shop Manual page 276

If the cam sprockets are removed, install the cam
sprockets onto the camshafts.
• Install the intake cam sprocket with the timing
mark (IN) facing outward and the No. 1 cam lobes
facing up and out as shown.
• Install the exhaust cam sprocket with the timing
mark (EX) facing outward and the No.1 cam
lobes facing up and out as shown.
Clean and apply a locking agent to the cam sprocket
bolt threads.
Install the cam sprocket bolts.
Turn the crankshaft clockwise and align the "T"
mark on the CKP sensor rotor with the index mark
on the right crankcase cover.
Apply molybdenum oil solution to the camshaft
journal of the cylinder head.
CYLINDER HEAD/VALVES
N0.1 CYLINDER CAM LOBES
INTAKE CAM SPROCKET
� BOLTS
8-27