FRAME/BODY PANELS/EXHAUST SYSTEM
SEAT
REMOVAL/INSTALLATION
Unlock the seat with the ignition key.
Remove the seat backward while releasing the seat
hooks.
Install the seat with inserting the hooks into the
frame.
Push the seat forward, then push down to lock it.
After installation, make sure that the seat is installed
properly by moving the seat.
SIDE COVER
REMOVAL/INSTALLATION
Remove the socket bolt.
Release the tabs from the swingarm pivot bracket
and fuel tank grommets, then remove the side
cover.
Install the side cover aligning its tabs with the grom
mets in the swingarm pivot bracket and fuel tank.
Install and tighten the socket bolt to the specified
torque.
TORQUE: 4.0 N-m (0.4 kgf•m, 3 lbf•ft)
2-4
GROMMETS
TABS
IGNITION KEY