Honda CB 600F Hornet 2007 Shop Manual page 515

SERVICE INFORMATION
GENERAL
I NOTICE
If the current is kept flowing through the starter motor to turn it while the engine is not cranking over, the starter motor
may be damaged.
• Always turn the ignition switch OFF before servicing the starter motor. The motor could suddenly start, causing serious
injury.
• The starter motor can be serviced with the engine in the frame.
• When checking the starter system, always follow the steps in the troubleshooting flow chart (page 19-4).
• A weak battery may be unable to turn the starter motor quickly enough, or supply adequate ignition current.
• Refer to the procedure for starter clutch servicing (page 9-17).
• Refer to the following components informations.
- Ignition switch (page 20-19)
- Engine stop switch (page 20-20)
- Starter switch (page 20-20)
- Neutral switch (page 20-23)
- Sidestand switch (page 2 0 - 2 3)
- Clutch switch (page 20-22)
SPECIFICATION
ITEM
Starter motor brush length
TORQUE VALUE
Starter motor terminal nut
12.0 (0.47)
10 N•m (1.0 kgf·m, 7 lbf·ft)
ELECTRIC ST ARTER
STANDARD
Unit: mm (in)
SERVICE LIMIT
6.5 (0.26)
19-3