Configuring A Windows 2000 Server For Symposium Tapi; Enabling Telephony Services - Nortel TAPI User Manual

70 Chapter 3 Preparing the TAPI environment

Configuring a Windows 2000 server for Symposium TAPI

After you install Symposium TAPI SP, you must prepare the server for TAPI
operations.

Enabling telephony services

To enable telephony services on a Windows 2000 server perform the following
tasks:
1 Before you can enable the telephony server you must ensure that the
Telephony service is enabled by selecting "Start -> Settings -> Control Panel
-> Administrative Tools -> Services" to display the services administration
window. If the Telephony service is not enabled, right-click Telephony and
then click Start.
2
Select "Start -> Run" and then type "tapimgmt.msc" to display the Telephony
Services administration window.
3
If the server you want to manage does not appear on the server list, select
"Action -> Add Computer" to display the Select Computer
window.(Figure 16)
Figure 16 Select Computer window
213346.02