11 The server must be restarted in order to enable the telephony service to run as
the selected telephony administrator's account.
Assigning lines to clients
Note: Before one can assign lines to clients, the database must be
populated with the line information. This can be done manually, or by
importing a backed up m1spdb.mdb file, or by downloading the line
Microso f
information from the switch (see Ch. 4.).
To assign lines to TAPI clients, perform the following tasks:
1
Select "Start ->Run" then type "tapimgmt.msc" to display the telephony
service administration window.
Network Managers Guide for Symposium TAPI Service Provider for Succession, release 3.0
Chapter 3 Preparing the TAPI environment
(Figure 19)
73