Configuring Domains On A Windows Server 2003 Server - Nortel TAPI User Manual

6
Right-click TAPIADMIN user and then click "Add members to a group..." to
display the Select Group window.
Figure 13 Select Group window
7
Highlight Administrators group and click OK to add TAPIADMIN user to the
group.
8
To add a client machine to the domain, right-click Computers in the Active
Directory Users and Computers tree view window
and then click Computer.
9
Enter the name of the client computer exactly as it appears on the client.
10 Select the appropriate operating system and click Add.
11 Repeat steps 8 through 10 for each client you want to add to the domain.

Configuring domains on a Windows Server 2003 server

Note: If TAPI SP 3.0 is installed on a Windows Server 2003 server, then
Active Directory must be configured on the domain.
The Windows Server 2003 server provides dynamic domain management. To
configure the server as a member of a domain perform the following tasks:
Network Managers Guide for Symposium TAPI Service Provider for Succession, release 3.0
Chapter 3 Preparing the TAPI environment
(Figure 13)
(Figure 12). Click New
63