94
Chapter 4 Configuration guidelines
In the Succession Host window you can perform the following configurations:
•
Host name. Nortel Networks recommends that you do not change the default
setting. The host name is case-sensitive, containing a maximum of 20
characters that represent the host name.
•
Host address. Enter the IP address of the host for Meridian Link Services. In a
call center, the host address is the IP address of the SCCS. In a direct connect
environment, the host address is the IP address of the E-LAN port on the
Succession switch.
•
Meridian Link release. Select the correct release number of Meridian Link
Services.
•
Machine name. Enter a string of a maximum of 20 ASCII characters that
identifies the Succession switch associated with the registered application.
•
Succession release — select the correct release number of the Succession
application.
•
Host port. This port number must match the one configured in the Meridian
Link Services. In an SCCS configuration accept the default. For a direct
connect configuration, change the entry to 8888.
•
Phantom DN. A reserve DN configured on the switch for the following call
features:
— Hold
— Transfer
— Redirect
— Conference
•
Customer number. If multiple customers are configured you can specify a
particular one in this field.
•
Registration password . You can use this optional field if you require an
association with a specific registration. You can enter a character string of
four to sixteen characters.
213346.02