Nortel TAPI User Manual page 3

SUCH PORTIONS OF THE SOFTWARE ARE PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
In addition, the program and information contained herein are licensed only pursuant to a license agreement that contains
restrictions on use and disclosure (that may incorporate by reference certain limitations and notices imposed by third
parties).
This equipment complies with Part 68 of FCC Rules. All direct connections to telephone network lines must be made
using standard plugs and jacks compliant with FCC Part 68. Please note the following:
1. You are required to request service from the telephone company before you connect the unit to a network. When
you request service, you must provide the telephone company with the following data:
• When you request T1 Service, you must provide the telephone company with
— The Facility Interface Code
Provide the telephone company with all the codes below:
– 04DU9-BN (1.544 MB, D4 framing format)
– 04DU9-DN (1.544 MB, D4 framing format with B8ZF coding)
– 04DU9-1KN (1.544 MB, ESF framing format)
– 04DU9-1SN (1.544 MB, ESF framing format with B8ZF coding)
– 04DU9-1ZN (1.544 MB, ANSI ESF and ZBTSI without line power)
The telephone company will select the code it has available.
— The Service Order Code(s) (SOC): 6.0F
— The required Universal Service Order Code (USOC) jack: RJ48C
• When you request 56K/64K Service, you must provide the telephone company with
— The Facility Interface Code: 04DU5-56/64
— The Service Order Code(s) (SOC): 6.0F
— The required Universal Service Order Code (USOC) jack: RJ48S
• When you request V.34 Service, you must provide the telephone company with
— The required Universal Service Order Code (USOC) jack: RJ11C
— The make, model number, Ringer Equivalence Number (REN), and FCC Registration number of the unit
The REN helps you determine the number of devices you can connect to your telephone line and still have
all of those devices ring when your number is called. In most, but not all, areas, the sum of the RENs of all
devices should not exceed 5.0. To be certain of the number of devices you can connect to your line, you
should call your local telephone company to determine the maximum REN for your calling area. This
equipment must not be used on party lines or coin lines.
• When you request ISDN "U" Interface Service, you must provide the telephone company with
— The Facility Interface Code: 02IS5
— The Service Order Code(s) (SOC): 6.0F
— The required Universal Service Order Code (USOC) jack: RJ49C
• When you request ISDN "S/T" Interface Service, you must provide the telephone company with
— The Service Order Code(s) (SOC): 6.0N
— The make, model number, and FCC Registration number of the NT1
Note: ISDN S/T cannot be directly connected to the network.
• When you request Primary Rate ISDN Service, you must provide the telephone company with
— The Facility Interface Code: 04DU9-1SN (1.544 MB, ESF framing format with B8ZF coding)
— The Service Order Code(s) (SOC): 6.0F
Network Managers Guide for Symposium TAPI Service Provider for Succession, release 3.0
3