Modifying A Tn - Nortel TAPI User Manual

2
Click Add Line to display the Add a Terminal Number Record window.
(Figure 34)
Figure 34
3
Type the loop, shelf, card, and unit numbers that identify the physical location
on the Succession switch of the TN you are adding.
4 Click OK to save the new TN to the TN table.
5
Perform the procedures described below to modify the information for this
TN.

Modifying a TN

To modify the information associated with a TN:
1
Click TN Table in the Succession Host configuration window to display the
Line Devices
2 Select the line you want to configure from the panel on the left side of the
window. If you do not know the line number for the TN, enter the TN number
in the field at the top left of the Line Devices window to search for the
associated line number.
Network Managers Guide for Symposium TAPI Service Provider for Succession, release 3.0
Add a Terminal Number Record window
window.(Figure 33)
Chapter 4 Configuration guidelines 99