•
the IP address of the remote TAPI server
•
the HLOC for the Succession switch associated with the remote TAPI
server
•
the port address for the remote IVR driver
•
the protocol for the remote IVR driver
3
Click OK to return to the Network TAPI/IVR Server window.
4
Click OK in this window to add the remote host address to the database.
Modifying an IVR remote host address
To modify an IVR remote host address:
1
In the Network TAPI/IVR Server window, select the entry you want to
modify in the list of remote host addresses.
2
Click Edit to display the Edit Remote Host Address window.
Figure 42 Edit Remote Host Address window
3
Modify the values that you want to change. Click OK to return to the Network
TAPI/IVR Server window.
4
Click OK in this window to save the modified information to the database.
Network Managers Guide for Symposium TAPI Service Provider for Succession, release 3.0
Chapter 4 Configuration guidelines
107
(Figure 42)