Assigning Lines To Clients - Nortel TAPI User Manual

80 Chapter 3 Preparing the TAPI environment

Assigning lines to clients

To assign lines to TAPI clients, perform the following tasks:
Microso f
1
Select "Start -> Run" and then enter "tapimgmt.msc" to display the Telephony
window
213346.02
Note: Before one can assign lines to clients, the database must be
populated with the line information. This can be done manually, or by
importing a backed up m1spdb.mdb file, or by downloading the line
information from the switch (see Ch. 4.).
(Figure 25)
.