Nortel TAPI User Manual page 78

78 Chapter 3 Preparing the TAPI environment
5
Select the server you want to manage in the server list and select "Action ->
Properties" to display the Telephony Server Properties window.
Figure 23 Telephony Server Properties window
6 In the Setup tab, select Enable telephony server. If the Enable telephony
server option is unavailable, checked that you clicked Start in Step 1 above.
7 In Account Information type the user name and password for the account that
will run the telephony service on the server.
The
213346.02
Note: The account to manage the telephony server must be a member of
the administrators group on the server. The account must be also in the
same domain as the TAPI server or be in a domain that has a two-way
trust relationship with that domain.
(Figure 23)