Configuring The Treatments Table - Nortel TAPI User Manual

96 Chapter 4 Configuration guidelines
• Delete a route number record. Delete the number of a route that you no longer
want to monitor.
• Add a range of route numbers. Add a range of route numbers to monitor.
• Delete all route numbers. Delete all route numbers to prevent the monitoring
of outbound trunks.

Configuring the treatments table

The treatments database table is used by the routing application. You can add new
treatments in the Treatments Table window in the configuration application. If
you make changes in the Treatments Table window they apply only to the
information contained in the Symposium TAPI SP database and do not affect the
configuration of the Succession switch.
To access the Treatments Table window click on Treatments Table in the
Succession Host configuration window.
Figure 32 Treatments Table window
In the Treatments Table window you can perform the following configurations:
• Treatment name. Type a maximum of 32 characters that identifies this
treatment (user-defined).
• Route number. Type a number between 1 through 511 that identifies the route
number for this treatment.
• Log style. Select the log style for this treatment. To create a new log style for
this treatment click Log Style Table to display the log style table window.
213346.02
(Figure 32)