Recovery Procedure - Nortel TAPI User Manual

where
47.48.49.50
Broadcast address: 47.48.49.255
Ethernet address: 00:00:75:32:1e:ca
Netmask: 0xff000000; Subnetmask: 0xfffff000
33520 packets received; 12308 packets sent
0 input errors; 0 output errors
0 collisions
If the IP addresses are not identical, the IP address is invalid and it is necessary to
perform the recovery procedure.

Recovery procedure

If the connection to the Primary IP address is lost, it can be reestablished by
performing the following tasks:
1 Manually initialize the system to reestablish a connection to the primary IP
address.
2 Perform the validation procedure again to confirm the Ethernet connection is
fully functional.
Configuring the Set
Each telephone DN monitored by the TAPI Service Provider needs to have the AST
configured to the value of the key (using LD 11). For example, if the keys you choose to
control are 00 and 03, set the values for 00 and 03. To have other TAPI Service Provider
call control features, such as transfer and conference, they must be programmed on the
set.
Network Managers Guide for Symposium TAPI Service Provider for Succession, release 3.0
indicates the actual IP address used
Chapter 2 Installation guidelines 45