Downloading Information From The Succession Switch - Nortel TAPI User Manual

86 Chapter 4 Configuration guidelines

Downloading information from the Succession switch

Before you download information from the Succession switch, create a switch
configuration information text file on the TAPI server:
1
In Notepad or a similar text editor application, create a text file.
2 Save this text file as download.txt in the c:\m1server directory on the TAPI
server.
3 Connect to the Succession switch from the TAPI server in one of the
following ways:
— On a Windows 2000 server, select "Start -> Programs -> Accessories ->
— On a Windows 2003 server, select "Start -> All Programs -> Accessories
4
When the port settings window opens, log on to the switch.
5 Select transfers.
6 In the HyperTerminal application on a Windows 2000 server or Windows
2003 server, select the Capture Text option.
7 Select the download.txt file that you created earlier.
8 To capture information about all used terminal number blocks (TNB), enter
the following commands in overlay 20:
> LD 20
REQ: PRT
TYPE: TNB
CUST 0 (or customer number)
~
DES <cr>
213346.02
Communications -> HyperTerminal".
-> Communications -> HyperTerminal".
Note: When you log on to the Succession switch, if text does not appear,
press the Return key a number of times the login prompt is displayed.
Note: To download information from the Succession overlay
applications can take a long time.