Adding A Terminal Server; Configuring A Terminal Server; Figure 6.8 Adding A Terminal Server; Figure 6.9 Configuring A Terminal Server - Nortel CC MIS User Manual

CC MIS
Release 5.2

Adding a Terminal Server

To add a new terminal server, press the Add function key. The dialog
(shown in the figure below) appears on the screen. Enter the IP address
and press the <Return> key.

Figure 6.8 Adding a Terminal Server

Configuring a Terminal Server

To configure a terminal server, press the Configure function key. The
dialog (shown in the figure below) appears on the screen. Follow the
instructions on the screen to enter and configure the terminal server.

Figure 6.9 Configuring a Terminal Server

6-12 297-2671-545