Configuring The Network Tapi/Ivr Table - Nortel TAPI User Manual
Network managers guide for symposium tapi service provider for succession, release 3.0
Hide thumbs
Also See for TAPI:
- User manual (56 pages) ,
- Reference manual (38 pages) ,
- Product support bulletin (2 pages)
Table of Contents
Advertisement
104
Chapter 4 Configuration guidelines
3
Click OK to save this information to the CDN table.
To delete a CDN:
1
In the CDN window scroll the entries in the DN field. Select the DN you wish
to delete.
2
Click Delete.
3
Click OK to save these changes to the CDN table.
Configuring the network TAPI/IVR table
The IVR driver on Symposium TAPI SP uses information in the IVR host table
database for the following:
•
to open a listening IVR port that the IVR application uses to register with the
IVR driver on the TAPI server
•
to keep this link open between Symposium TAPI SP and the IVR system, so
that the IVR system can send call data to the TAPI server
In a networked environment, the IVR driver uses information stored in the remote
host address table to request call data for inbound calls overflowed from a remote
Succession swtich.
Refer to
networking and IVR features for Symposium TAPI SP.
213346.02
Chapter 6, "Networked TAPI/IVR," on page 127
for information about
Advertisement
Table of Contents
Troubleshooting
