3
In the warning message window that is displayed
delete the line from the TN table.
Figure 36 Warning message
4
To delete all TNs from the TN table, in the Line Devices window, click
Delete All. Click OK in the warning message window that is displayed.
Adding a DN
You can associate a maximum of two DNs with each line in the TN table. When
you add, modify, or delete information in the DN table, the TN table reflects the
changes. To add a new DN:
1
In the Line Devices window, in the panel on the left side of the window, select
the line number to which you want to add a DN.
2
Click Add DN on the right side of the window to display the add a directory
number record window.
3
Type the directory number and select the DN type. Click OK to save this
information to the DN table and the TN table.
4
Modify the information associated with this DN.
Modifying a DN
To modify a DN:
1
In the Line Devices window, locate the line number that you want to
configure in the left panel of the window.
2
Expand the information under this line number to display its associated DN or
DNs.
Network Managers Guide for Symposium TAPI Service Provider for Succession, release 3.0
Chapter 4 Configuration guidelines
(Figure
101
36), click OK to