Configuring A Windows Server 2003 Server For Symposium Tapi; Enabling Telephony Services - Nortel TAPI User Manual

76 Chapter 3 Preparing the TAPI environment
Configuring a Windows Server 2003 server for Symposium
TAPI
After you install Symposium TAPI SP, you must prepare the server for TAPI
operations.

Enabling telephony services

To enable telephony services on a Windows Server 2003 server perform the
following tasks:
1
Before you can enable the telephony server you must ensure that the
Telephony service is enabled by selecting "Start -> Administrative Tools ->
Services" to display the services administration window. If the Telephony
service is not enabled, right-click Telephony and then click Start.
2
Select "Start -> Run" and then enter "tapimgmt.msc" to display the
Telephony window
Figure 21 Telephony window
213346.02
.(Figure 21)
.