Configuring The Symposium Tapi Sp Database - Nortel TAPI User Manual

90 Chapter 4 Configuration guidelines
The conversion process adds all information downloaded from the Succession
switch to the Symposium TAPI SP database. Some of this information can be
unnecessary or inappropriate. For example, the Succession switch assumes that
IVR ports are analog. These ports must be set on the TN Table window of the
configuration application. You must delete CDNs that are downloaded that
Symposium TAPI SP does not need to monitor.

Configuring the Symposium TAPI SP database

This section describes the Symposium TAPI SP database tables and how to
manage them in the Symposium TAPI SP configuration application. Each
database table has an associated window in the graphical user interface (GUI) of
the configuration application. The database tables are:
• Provider
• Succession Host
• Network TAPI/IVR Server
• Log Styles
• Compliance
213346.02
Note: Nortel Networks recommends that only experienced database
administrators configure the Symposium TAPI SP database.