Adding A Trap Receiver; Figure 27 Chassis, Insert Trap Receive Dialog Box; Table 20 Edit Chassis Dialog Box - Trap Receivers Tab Items - Nortel BayStack 380-24F Reference

Table 20 describes the Trap Receivers tab items.
Table 20 Edit Chassis dialog box — Trap Receivers tab items
Item Description
NetAddr The address (or DNS hostname) for the trap receiver.
Community Community string used for trap messages to this trap receiver.

Adding a Trap Receiver

To edit the network traps table:
1
In the Trap Receivers tab
The Chassis, Insert Trap Receive dialog box opens

Figure 27 Chassis, Insert Trap Receive dialog box

2
Type the Index, NetAddr, and the Community information.
Note: Refer to
Insert Trap Receivers dialog box items.
3 Click Insert.
Reference for the BayStack 380-24F Gigabit Switch Management Software
Chapter 2 Configuring and graphing the switch 57
(Figure 26), click Insert.
Table 20 on page 57 for description of the Chassis
(Figure 27).
,