Displaying And Clearing Network Sessions By Session Id - Nortel 2360 Configuration Manual

Displaying and clearing network sessions by session ID

You can display information about a session by session ID. To find local session IDs, enter the show sessions command.
You can view more detailed information for an individual session, including authorization parameters and, for wireless
sessions, packet and radio statistics.
For example, to display information about session 27, type the following command:
WSS# show sessions network session-id 88
Local Id: 88
Global Id: SESS-88-00040f-876766-623fd6
State: ACTIVE
SSID: Rack-39-PM
Port/Radio: 10/1
MAC Address: 00:0f:66:f4:71:6d
User Name: last-resort-Rack-39-PM
IP Address: 10.2.39.217
Vlan Name: default
Tag: 1
Session Start: Wed Apr 12 21:19:27 2006 GMT
Last Auth Time: Wed Apr 12 21:19:26 2006 GMT
Last Activity: Wed Apr 12 21:19:49 2006 GMT ( <15s ago)
Session Timeout: 0
Idle Time-To-Live: 175
Login Type:
EAP Method:
Session statistics as updated from AP:
Unicast packets in: 31
Unicast bytes in: 3418
Unicast packets out: 18
Unicast bytes out: 2627
Multicast packets in: 0
Multicast bytes in: 0
Number of packets with encryption errors: 0
Number of bytes with encryption errors: 0
Last packet data rate: 48
Last packet signal strength: -60 dBm
Last packet data S/N ratio: 35
Protocol: 802.11
Session CAC: disabled
For example, to display information about per session QoS statistics.
Syntax
WSS# show sessions network session-id 75
Local ID:
Global ID:
State:
SSID:
VLAN Name:
LAST-RESORT
NONE, using server 172.16.0.1
75
SESS-71-3b993e-27276-77bf514
ACTIVE
Nortel-Voice
VLAN120
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Managing sessions 619