Nortel 2360 Configuration Manual page 413

Configuring and managing security ACLs 413
AP forwarding prioritization occurs automatically for Wi-Fi Multimedia (WMM) traffic. You do not need to
configure ACLs to provide WMM prioritization. For non-WMM devices, you can provide AP forwarding
prioritization by configuring ACLs.
If you disable WMM, AP forwarding prioritization is optimized for SpectraLink Voice Priority (SVP) instead
of WMM, and the AP does not tag packets it sends to the WSS. Otherwise, the classification and tagging
described in "Displaying QoS information" (page 361) remain in effect.
If you plan to use SVP or another non-WMM type of prioritization, you must configure ACLs to tag the
packets. (See "Enabling prioritization for legacy voice over IP" (page 434).)
Optionally, for WMM or non-WMM traffic, you can use ACLs to change the priority of traffic sent to an AP
or VLAN. (To change CoS for WMM or non-WMM traffic, see "Using ACLs to change CoS" (page 431).)
Nortel WLAN—Security Switch 2300 Series Configuration Guide