Generating self-signed certificates
After creating a public-private key pair, you can generate a self-signed certificate. To generate a self-signed certificate,
use the following command:
crypto generate self-signed {admin | eap | web}
When you type the command, the CLI prompts you to enter information to identify the certificate. For example:
WSS# crypto generate self-signed admin
Country Name: US
State Name: CA
Locality Name: San Jose campus
Organizational Name: nortel
Organizational Unit: eng
Common Name: WSS1
Email Address: admin@example.com
Unstructured Name: WSS in wiring closet 120
success: self-signed cert for admin generated
You must include a common name (string) when you generate a self-signed certificate. The other information is
optional. Use a fully qualified name if such names are supported on your network. The certificate appears after you enter
this information.
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Managing keys and certificates 455