Viewing Security Acl Information; Viewing The Edit Buffer; Viewing Committed Security Acls - Nortel 2360 Configuration Manual

420 Configuring and managing security ACLs

Viewing security ACL information

To determine whether a security ACL is committed, you can check the edit buffer and the committed ACLs. After you
commit an ACL, WSS Software removes it from the edit buffer.
To display ACLs, use the following commands:
show security acl editbuffer
show security acl info all editbuffer
show security acl info
show security acl
Use the first two commands to display the ACLs that you have not yet committed to nonvolatile storage. The first
command lists the ACLs by name. The second command shows the ACLs in detail.
Use the show security acl info command to display ACLs that are already committed. ACLs are not available for
mapping until you commit them. (To commit an ACL, use the commit security acl command. See
Security ACL" (page 419).)
ACLs do not take effect until you map them to something (a user, Distributed AP, VLAN, port, or virtual port). To map
an ACL, see "Mapping security ACLs" (page
without the editbuffer or info option.

Viewing the edit buffer

The edit buffer enables you to view the security ACLs you create before committing them to the configuration. To view
a summary of the ACLs in the edit buffer, type the following command:
WSS# show security acl editbuffer
ACL edit-buffer table
ACL
-------------------------------- ---- -------------
acl-99
acl-blue
acl-violet

Viewing committed security ACLs

To view a summary of the committed security ACLs in the configuration, type the following command:
WSS# show security acl
ACL table
ACL
------
acl-2
acl-3
acl-4
NN47250-500 (320657-F Version 02.01)
422). To display the mapped ACLs, use the show security acl command,
Type Status
IP Not committed
IP Not committed
IP Not committed
Type Class Mapping
---------------------------
IP Static
IP Static
IP Static
"Committing a